DMC Porsche 992 GT3: Carbon Fiber Front Hood : OEM Replacement Bonnet Vented in GT3 GT2 RS Style
DMC Porsche 992 GT3: Carbon Fiber Front Hood : OEM Replacement Bonnet Vented in GT3 GT2 RS Style
Description
The iconic DMC GT2 Front Hood for the Porsche 992 Carrera, Turbo & Targa, made from Carbon Fiber. DMC products are certified by TUV, a German government approved authority for car safety standards. The design was inspired by the famous DMC 992 Turbo Wing and includes lines of the Aero Kit as well. A great look for the 992 Carrera, Targa and Turbo.
The 992 is a superb looking car however from a distance with the softer curves than the its Turbo sibling, it can look a little tame. We aim to change that with our new range of 992 Carbon. The DMC Carbon GT2 Bonnet really is the finisher to any cars front fascia. The 992 from factory has quite a tame looking front fascia, that really doesn’t do a proper Porsche any justice. The DMC carbon creation fits into the factory design, and a more aggressive look. It is absolutely integrated with the OEM lines, not looking aftermarket at all. While the GT3 Bonnet (is available from DMC as well) has only the two vents near the bumper area, our GT3 hood has two additional vents in the center area.
The Carbon Fiber Bonnet is made up from lightweight and strong Carbon Fiber, produced via vacuum infusion giving both great strength and superior finish. Once the part has been produced and pulled from the mould, it is checked and tested thoroughly before heading to lacquer. Each part is inspected further and checked for tolerances before being hand and machine polished.
Install:
This is a replacement part, the OEM bonnet needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 140 minutes to fit.
Includes:
DMC Carbon Fiber Hood GT2 Style
Gel Coat:
DMC Products come with a free Gloss or Matte Coating on all Carbon Fiber items, please leave a note at check out which one you like. If you don’t specify we will add a gloss base layer. However we suggest you to add one additional layer to match your country’s local UV and weather requirements as they differ throughout the world. We also suggest to wax and seal the item further, even though we include a base seal of high quality carnauba product. This can be protective in regions that have high humidity or rain.
Original: $3,475.72
-70%$3,475.72
$1,042.72
Description
Description
The iconic DMC GT2 Front Hood for the Porsche 992 Carrera, Turbo & Targa, made from Carbon Fiber. DMC products are certified by TUV, a German government approved authority for car safety standards. The design was inspired by the famous DMC 992 Turbo Wing and includes lines of the Aero Kit as well. A great look for the 992 Carrera, Targa and Turbo.
The 992 is a superb looking car however from a distance with the softer curves than the its Turbo sibling, it can look a little tame. We aim to change that with our new range of 992 Carbon. The DMC Carbon GT2 Bonnet really is the finisher to any cars front fascia. The 992 from factory has quite a tame looking front fascia, that really doesn’t do a proper Porsche any justice. The DMC carbon creation fits into the factory design, and a more aggressive look. It is absolutely integrated with the OEM lines, not looking aftermarket at all. While the GT3 Bonnet (is available from DMC as well) has only the two vents near the bumper area, our GT3 hood has two additional vents in the center area.
The Carbon Fiber Bonnet is made up from lightweight and strong Carbon Fiber, produced via vacuum infusion giving both great strength and superior finish. Once the part has been produced and pulled from the mould, it is checked and tested thoroughly before heading to lacquer. Each part is inspected further and checked for tolerances before being hand and machine polished.
Install:
This is a replacement part, the OEM bonnet needs to be removed for installation. Although fitting is quite straight forward we do always recommend using a trained professional to undertake the install. We estimate around 140 minutes to fit.
Includes:
DMC Carbon Fiber Hood GT2 Style
Gel Coat:
DMC Products come with a free Gloss or Matte Coating on all Carbon Fiber items, please leave a note at check out which one you like. If you don’t specify we will add a gloss base layer. However we suggest you to add one additional layer to match your country’s local UV and weather requirements as they differ throughout the world. We also suggest to wax and seal the item further, even though we include a base seal of high quality carnauba product. This can be protective in regions that have high humidity or rain.
